decoration profile decoration products decoration inquiry decoration email decoration
 
profile
decoration  
PRINTING MACHINE | Jumbo Bag Printing Machine | CS2200-A03
 

2.Technical specifications:

Color Single Side 3 colors or less
Max. bag width 2200 x1600mm
Max. printing area 2200 x1200mm
Printing Speed 20-25pcs/min
Power connection 15HP
Machine weight About 5T

3. Each machine consists of:


1). Bag Feeding Platform

2). Printing Unit

1 set of Main Motor for driving with inverter control
3 sets of Printing Roller, Anilox Roller and Rubber Roller for 3 Colors
1 sets of Infra Red Dryer for single side drying
3 sets of Auto-Recirculation/Mixing System for Paint mixture (Air Pump)

3). Bag Collection Unit
Auto counting, stacking and conveyor-belt advancing

4). Electrical Control Panel
1 set of inverter for Main Motor

5). Air Compressor: 5.5HP 1 set

4. Machine Feature
1). High Precision Color Positioning
2). Print Sensor: When no bag is detected, print and anilox rollers will separate
3). Auto Recirculation/Mixing System for Paint Mixture
4). Auto counting, stacking and conveyor-belt advancing
5). Infra Red Dryer
6). PLC operation control, digital display for operation monitor


5. Power consumption list
S/N Item Qty Unit consum. Install power Remark
1 Main motor 1pc 5HP 5HP Inverter control
2 Infra Red Dryer
1set 4HP 4HP  
3 Delivery Motor 1pc 0.5HP 0.5HP  
4 Air Compressor 1pc 5.5HP 5.5HP  
Total Power Installation 15HP  

6. One set of Spare parts and Tool Box
S/N Free Spare parts Unit Qty
1 Ink rubber roller set 1
2 4V220—08 24V solenoid valve m 1
3 Coil of Solenoid Valve m 2
4 HC-H-DC24V Relay m 1
5 LC-D0610M5N AC contactor m 1
6 LR-D1306N Heat relay pc 1
7 Sensor Switch pc 1
8 Approx. Switch pc 1
9 Fuse pc 5
10 Film m 10
11 Heater pc 2
12 Tool box set 1

7. BRAND OF MAIN ELECTRONIC PARTS AND MOTOR:
1. Electronic motor, reducer: Taiwan made
2. Operation Monitor: SIEMENS
3. PLC controller: SIEMENS
4. Inverter: ABB or Mitsubishi
5. Relay: OMRON
6. Cylinder and solenoid valve: Taiwan
7. Contact breaker, contactor, push button: France made (SNID)
8. Conveyor belt: Holland
9. Main Ball bearing: Japanese
10. Bearing set: Sino-Germany joint venture brand
11. All the electronic parts: CE or UL approval
12. Electronic control protection: Designed as the degree of “IP21”

8. ELECTRICAL CHARACTERISTICS
Power supply:                3 Phase 380V
Voltage variation:           max ±10%
Frequency                       50HZ
Frequency variation       ±2HZ

9. PACKING
The machines will be packed in standard 1×40’ containers.


GO BACK  
top bottom   TOP  

Head Quarter & Factory : No.56, Ln. 37, Sec. 2, Renhe Rd. Daxi Township, Taoyuan County 33548 Taiwan
TEL: 886-3-3896016 (Rep.)    FAX: 886-3-3896103    E-mail: csmal@ms10.hinet.net