decoration profile decoration products decoration inquiry decoration email decoration
 
profile
decoration  
CIRCULAR LOOM | 6,8 SHUTTLE CIRCULAR LOOM | CS-6/130T
 
SPECIFICATIONS
CS-6/130T
A.Working Ability
  a.Shuttle Speed 90 RPM MAX
  b.Number Of Shuttle 6 sets Shuttle Frame Inside Width 92 MM
  c.Weft Inserting Speed 480 RPM
  d.Weft Density 8-19. Pieces / Inch
  e.Weaving Width Range 80 - 125 Centimeters Lay Flat *(125cm*19 Piecers Max)
B. Yarn Package
  a.Yarn Type Standard PP Or HDPE Flat Tape Yarn
  b.Weft Tube(Bobbin) Inside Diameter 23 - 38 mm, Length 215 - 230 mm
  c.Weft Package Outside Diameter 100 mm Maximum, Traverse Within 8"
  d.Warp Tube(Bobbin) Inside Diameter 23 - 28 mm
  e.Warp Package Outside Diameter 120 mm Maximum
  f.Warp Creel Standard 1920 Bobbins, Options Avalable
C. Cloth Winder
  a.Winding Type Two - Roller Surface Winding
  b.Winding Roller Size 164mm x 1600mmL
c.Cutting Device 2 sets
  d.Diameter of Web Roll 1000 mm Maximum
  e.Torque AC Motor 7.5 kg-cm x 2 set
  f.Production Display 3 Shift's & Total Meter equipped
D. Power
  a.Main Drive Motor 3 Phase, AC 7.5 Hp ( 6 Pole)
  b.Fan (Industial) Motor 3 Phase, AC 1/2 Hp
  c.Normal Consumption 3.5 kw (90 RPM) Approximately
  d.Starting Power Required 5.5 kw
e.Oil sprayer of cam Co-setpping pump with main motor & il detector equipped
f.Shuttle lubricaing pump 25W magenetic electric pump controlled by PLC
g.Control system PLC with relay system
h.Inverter Standard equipmnet 1 set
E. Layout & Packing
  a.Layout Space 16.50 (L) x 2.85 (W) x 3.45 (H) Meters
  b.Packing Gross Weight Net weight 3500 Kilograms Approximately
  c.Packing Measurement Approximtely 10.5 Cubic Meters, 5 Units/40" Container
  * Different Lay Flat Size Bag Require Corresponding Attachment(s) To Produce.
*Specifications and dimensions are subject to change without prior notice.


GO BACK  
top bottom   TOP  

Head Quarter & Factory : No.56, Ln. 37, Sec. 2, Renhe Rd. Daxi Township, Taoyuan County 33548 Taiwan
TEL: 886-3-3896016 (Rep.)    FAX: 886-3-3896103    E-mail: csmal@ms10.hinet.net