decoration profile decoration products decoration inquiry decoration email decoration
 
profile
decoration  
PP / HDPE YARN EXTRUSION LINE | CSY100-128HS
Plastic Extruding Flat Film Stretching line (High Speed)
 
CSY100-128HS....


Based on absorbing ab road advanced technology, this series of plastics flatfilm draw set is designed by ourselevs in accirdance with the domestic practical conditions of plastics weaving industry.

The specially designed screw cylinder of extruder is made from high quality steels. It features large in output, low in consume of energy and long life.

The draw part is used the method of sectional installation and integral drive. Therefor it features resonable in driving and convenient in adjustment, it is convenient for customers to expend its application scope of products in the future. The design of split yarn cutter makes the nod of cutter elements become possibility, thus the operation life can be increased.
And the cutter elements also can be lateral movement, so that it can fullyutilize the effective wideth of film and reduce the was of marg in materials.

The speed of motor is controlled bt the method of sync horonization speed regulation with three in one. According to the cutomes's requirements, it alos can be controlled by the methods of electromagnetic speed regulation.

This series of sets are equipped with the anxiliary machines, such as automatic feeder, recovery package for margin yarn, absorbing dewiness device, collecting abolish silk system.

The complete sets is compact in structure, beautiful in appearance, steady in operation, fast in speed, large in output, low in consume of energy and good in quality of shaped yarn cylinder. It is suitable for processing of flat yarn of PP and LPPE. etc.


 


Technical specifications:

Model CSY100-128HS CSY120-168HS CSY125-192HS CSY130-216HS
Extruder Screw diameter Ø100mm Ø120mm Ø125mm Ø130mm
Screw rotation 20-100 rpm
L/D ratio 32/1
Driving motor 100 HP 125 HP 150 HP 175 HP
Control system Synchronal control with inverter
Auto thermo-control 8 zones 9 zones 10 zones
Heating capacity 46 kW 58 kW 62 kW 68 kW
Cooling blower system 1/8 HPx4 PCs 1/6 HPx5 PCs 1/6 HPx6 PCs
Extrusion output
(1000 Denier)
220 kg/hr 300 kg/hr 350 kg/hr 400 kg/hr
Vacuum auto-loader Conveying cap. 350 kg/hr,
Height: 5M, motor: 1HP
Conveying cap. 450 kg/hr,
Height: 5.5M, motor: 2HP
Hopper dryer Cap. 50 kg, heating power: 3.9 kW, Blowing
power: 200 W Including 7 pieces magnetic bar
Cap. 100 kg, heating power: 6 kW, Blowing
power: 250 W Including 7 pieces magnetic bar
Filter style Auto screen change system
T-Die Die width 800 mm 1020 mm 1160 mm 1300 mm
film width 700 mm 920 mm 1060 mm 1200mm
Die gap 0.8-1.0 mm
Auto thermo-control 3 zones 5 zones
Heating capacity 12 kW 16 kW 20 kW 24 kW
Quench Unit Suction blower 3 HP 5 HP 7.5 HP
Driving motor+reducer 2 HP 3 HP
Control system Synchronal control with inverter
Cooling blower system 25 ton 30 ton 40 ton 50 ton
Water Chiller Model KT-750 KT-1000 KT-1500
Compressor horsepower 7.5 HP 10 HP 15 HP
Refrigerating energy 23362 Kcal/H 31500 Kcal/H 46623 kcal/H
Refrigerating cap. 92700 BTU/H 125000 BTU/H 185000 BTU/H
Water pump 2 HP 3 HP 5 HP
Slitting Unit Slitting knife 5-way razor blades
Number of slitting unit 6 mm thickness x 1 set + 7 mm thickness x 1 set
Moving of slitting 25 mm removable (L<->R)
Take-up Unit Quanity of roller 5 PCs
Driving motor 3 HP 5 HP 7.5 HP
Control system Synahronal control with inverter
Line speed 10-55 M/min
Waste yarm collector 3 HP 5 HP 7.5 HP
Reclaiming
system
Crusher Motor 1 HP
Conveying blower 2 HP
Chips driving motor 1/2 HP
Stretching Oven Stretching method Single layer style hot air circulation
Blower 3 HP x 1 set 5 HP x 1 set 3 HP x 2 sets
Heating capacity 36 kW 45kW 50kW 58kW
Stretching &
Annealing
Roller
Quantity of streching roller 5 PCs
Driving motor 7.5 HP 10 HP 15 JHP
Quantity of annealing roller 2 PCs with chill water circulation
Driving motor 3 HP 5 HP 7.5 HP
Line speed Producing speed 50-300 M/min      Max. 350 M/min
Control system Synahronal control with inverter
Waste yarn collector 3 HP 5 HP 7.5 HP high speed blower
Static elimination device 1 set
Take-up Winder Tension control Magnetic disk style
Quantity of spindles 128 PCs 168 PCs 192 PCs 216 PCs
Driving motor 1/4 HP high speed motor
Winding speed FW-300 type 50-300 M/min      Max.350 M/min
Length of traverse 200 mm
Bobbin size 35 mm (ID) x 40 mm (OD) x 220 mm(L)
Control Panel Concentration style or Modularized style
Pneumatic Air Compressor 7.5 HP 10 HP w/auto pressure switch for pneumatic operating & air gun using
Installation Total power required 230 kW 295 kW 340 kW 390 kW
Power consumption 160 kW 205 kW 238 kW 273 kW
Machine weight (ton) 23 ton 27 ton 31 ton 36 ton
Floor space (LxWxH) 30x5x3 M 34x5.3x3.2 M 36x5.5x3.5 M 38x5.6x3.5 M
*PS. This data is as reference only.


GO BACK  
top bottom   TOP  

Head Quarter & Factory : No.56, Ln. 37, Sec. 2, Renhe Rd. Daxi Township, Taoyuan County 33548 Taiwan
TEL: 886-3-3896016 (Rep.)    FAX: 886-3-3896103    E-mail: csmal@ms10.hinet.net